Truk Pemadam Kebakaran Pompa Pemadam Kebakaran CB10/140-XZ

The CB10 30 fire pump adopts a single-stage centrifugal pump structure with a two-piston priming device. The priming device is activated by the pump's rotation and automatically disengages once the required pressure is reached. The product operates stably and is reliable in quality, with various inlet and outlet pipe options available.

The CB10/60 low-pressure vehicle fire pump is characterized by excellent performance, high efficiency, compact structure, aesthetic design, simple operation, and convenient maintenance. It is suitable for medium and heavy-duty water tank fire trucks, foam fire trucks, and water tower fire trucks, etc.

The Isuzu GIGA 6X4 10 cubic meter foam fire truck is based on the Isuzu GIGA 6X4 chassis, with a wheelbase of 4600mm+1370mm. It is equipped with an Isuzu 6UZ1-TCG61 engine and a Fast 12-speed transmission. The front of the superstructure houses the equipment compartment, the middle section contains an 8500L carbon steel water tank and a 1500L stainless steel foam tank, and the rear is the pump room, equipped with a CB10/60-XZ fire pump, control panel, fire hoses, firefighting equipment, etc. A PL8/48 fire monitor is located on the roof.

ISUZU GIGA Heavy-Duty Water Tender adalah kendaraan serbaguna untuk keperluan khusus yang mengintegrasikan kemampuan pemadaman kebakaran dan pemeliharaan lingkungan. Dibangun di atas sasis ISUZU GIGA 6×4, kendaraan ini ditenagai oleh mesin 420HP dan memiliki tangki air berkapasitas besar 16.000L. Dilengkapi dengan pompa pemadam kebakaran CB10/60 profesional dan monitor kebakaran PS8/50W dengan jangkauan 65 meter, kendaraan ini menawarkan sistem penyemprotan air yang komprehensif, termasuk pembilasan depan, penyiraman belakang, dan penyemprotan samping. Kendaraan ini dirancang untuk pemadaman kebakaran perkotaan dan pedesaan, pemadaman kebakaran hutan, pembersihan jalan, pengurangan debu, dan penghijauan. Dengan mobilitasnya yang luar biasa dan desain multifungsi, kendaraan ini memenuhi kebutuhan pemeliharaan lingkungan harian dan kebutuhan tanggap darurat yang cepat, menjadikannya aset yang sangat diperlukan dalam sistem penyelamatan modern.

The Howo TX 4x2 7.5 cubic meter foam fire truck uses the Howo TX chassis with a 4700mm wheelbase. It is equipped with a Weichai WP4.6NQ240E62 engine and a Sinotruk HW95508STCL gearbox. The front of the superstructure is an equipment box for storing auxiliary firefighting equipment. The middle section contains a 5.5 cubic meter carbon steel water tank and a 2 cubic meter stainless steel foam tank. The rear pump room is equipped with a CB10/40-LC(BS) fire pump, control panel, firefighting equipment, PL8/32 fire monitor on the tank top, and two European standard manholes.

The CB10 30 fire pump adopts a single-stage centrifugal pump structure with a two-piston priming device. The priming device is activated by the pump's rotation and automatically disengages once the required pressure is reached. The product operates stably and is reliable in quality, with various inlet and outlet pipe options available.

The Fire Truck Foam Cannon PL24 is a high-efficiency firefighting device for medium- and long-range fire suppression, featuring high flow rate, long range, and stable spray. PL24 fire monitor can switch between direct current and spray modes, improving fire suppression efficiency while maintaining a safe distance, meeting various firefighting needs.

The Fire Truck Foam Cannon PL48 is a manual fire monitor that can spray both foam and water. It has a rated flow rate of 48 L/s, a rated pressure of 0.8 MPa, a water spray range of ≥70 m, and a foam spray range of ≥60 m. The monitor can rotate 360° horizontally and has an elevation angle of -30° to 70°, offering flexible operation.